Slouching Onwards to Automotive… Somthing or other.

It’s been that kind of summer. Between finally getting to the track and some general meandering around the province, I’ve put about 9000km on the ‘coupe this summer. That’s actually a big deal for me, as I commute to work by bike, so during the week, it’s not unusual for me to not even start the car for four or five days. Basically, all that mileage is cottage runs, and cruises.

The track wasn’t high mileage (obviously) but 90 minutes at basically wide-open throttle (I kid you not, I could WATCH the gas gauge drop) is hard mileage. So, I’ve ended up with a few more oil changes than usual during the summer too.

There’s just time for two more, as well – Right now, I need an oil change and then I’ll need one again next month.

Next month, you say? That’s crazy talk, three months for oil changes is the norm.

Except.

September27th, I leave for Tail of the Dragon.

It is 1686km one way. Tail of the Dragon (Deal’s Gap) is in Tennessee. I’ve no idea how much mileage I’ll do there, but then it’s 1686km home, as well. I figure that the bare minimum I’ll do in those five or six days is 4000km.

Now, THAT’S a driving vacation.

And right now, a bunch of you are muttering to yourselves that I’m nuts. And I’m not sure you’re wrong. But, with the help of someone who’s done it before, I’ve got a route that, while slightly longer, runs through some very scenic country that isn’t downtown Detroit.

2016TailoftheDragon//embedr.flickr.com/assets/client-code.js

That should be some pretty glorious driving, even if it is fifteen hours worth. Each way.

Before that, though, I’ve gotta I had to deal with the car. (Had to – Ummm, I was gonna post this Friday afternoon, and it’s now Monday morning. Whattayagonnado?)

Like I said, oil change. that’s actually scheduled for 2pm Friday – Finally, I’ve hit my last “included” oil-change (20 of them at time of purchase, 7.5 years ago). Once that’s done, it sounds like Friday tonight was going to be burgers’n’shakes (and it was), our weekly car crew get-together. Saturday morning, I was up at 7am, and in the garage.

What’s on the agenda?

First, brakes. You’ve all read by now the Post-trackday work I had with the brakes. And through the awesomeness of friends, that got me back to “driveable”. I want better than that for the Dragon, though. So, I ordered up some EBC YellowStuff pads:

2016-09-26_07-51-49//embedr.flickr.com/assets/client-code.js

I’ve also got OEM rotors for the back brakes, that are fresh(er than my R1 Concepts ones), and that combination should be prettty good.

once that’s done, I definitely have to change the brake fluid. It would have been nice to do steel lines, but that’s going to be part of the winter upgrade – I don’t have the cash or time right now.

I hate bleeding brakes. Passionately. So, I’m kinda hoping I’ll have some help for it. We’ll see how that goes. I’m pretty sure I can manage, I won’t be trying to get bubbles out of the system, just trying to clear the old and refill with new, so I don’t REALLY anticipate any problems.

IMG_20160924_152215//embedr.flickr.com/assets/client-code.js

It’s not rocket surgery, after all. Also, found a “one man bleeder kit” at Canadian Tire, and that was $8 well spent, as far as I’m concerned. No bubbles from what I could see, and all the fluid was coming out clear, and clean…. after a few good pumps. #notaeuphemism.

After that, the car is basically good to go. If I have time, I’ll probably pull the AEM DryFilter, and wash it, along with the hydroshield. I have to remove the front bumper for that. While the bumper’s off, I want to tighten up the lip as well – since I realigned it, it seems to move around some. I’m not really worried about it falling off, but I’d like it not to scratch what’s left of my paint. So, if I get time for that, that’s on the agenda too.

Tire pressures will be set. To factory. Because that’s what you do.

After all that, interior cleaning and set-up. I’m going to have a ton of electronics charging in the car – multiple (GPS, four… maybe? Five? go-pros, a pair of Uniden walkie-talkies, my phone, oh, and my regular-issue dashcam.

2016-09-26_07-49-13//embedr.flickr.com/assets/client-code.js

How to run all that?

Mount a 12V splitter – I have a stack of 12v dual-2.1a-USB sockets, which are perfect for charging pretty much anything, I just need enough 12v sockets to plug everything in. the only trick will be “where to mount the splitter”. So, I guess THAT’S on the agenda, too.

Actually, ended up being fairly easy:

2016-09-26_07-55-49//embedr.flickr.com/assets/client-code.js

At the same time, I ran my longest USB cable under the console, and out the back, into the back seat. I want to do a video of the entire drive down, then speed it up, and set it to music – 1700km in 6 minutes or so. We’ll see how that works out. But I’m mounting it way in the back, rather than just in the windshield, so that, hopefully, it’s a little more interesting and personal. I think Andyman is going to do an exterior camera for this, so it’ll be interesting to see the differences.

2016-09-26_07-56-02//embedr.flickr.com/assets/client-code.js

Roadtrips. They’re just the same and very different from what they used to be. All I used to take was a couple of big, spiral-ring map-books. And most people thought that was too much, too. Apparently, wifi/connectivity is hard to come by once we actually GET to TotD, but I’ll be posting as I go/when we stop. If you’ve any interest in the along-the-way antics and any updates I can do from Fontanta Village itself, feel free to follow me on @boozysmurf on Twitter, and/or @b00zysmurf on Instagram.

Advertisements